Halitosis and Pain Threshold of Peri-Implant Tissues: An Observational Cohort Study.

In this study, we aimed to evaluate the halitosis and pain threshold of the peri-implant soft tissues in individuals rehabilitated with implant-supported prostheses. Forty-eight subjects were divided into four groups (n = 12) according to their prosthetic rehabilitation: single-tooth fixed prosthesis, multi-tooth fixed prosthesis, overdentures, and the Brånemark protocol. Halitosis was measured using a halimeter, whereas the pain threshold was measured using Von Frey monofilaments. Measurements were taken before (t0) and 30 days after (t1) placement of healing caps, and at the time of (t2) and 30 days after (t3) prosthetic placement. Halitosis data were analyzed using the chi-square test and Bonferroni correction (p < 0.05). Two-way ANOVA and Tukey's test (p < 0.05) were used to analyze pain threshold data. We noted an association between halitosis and time for the Brånemark protocol [X2(6) = 18.471; p = 0.005] and overdenture groups [X2(6) = 17.732; p = 0.007], and between halitosis and type of prosthesis only at t0 [X2(6) = 12.894; p = 0.045]. The interaction between time and the type of prosthesis significantly interfered with the mean pain threshold values (p = 0.001). At most time points, the majority of participants in each group had clinically unacceptable halitosis. After 30 days of using the prostheses, the overdenture group had a lower pain threshold compared to the Brånemark protocol group.

Cytotoxicity of cleaning agents for ocular prostheses.

BACKGROUND: Polymethylmethacrylate (PMMA) is the most used material for the manufacturing of eye prostheses. OBJECTIVES: To investigate the cytotoxicity of different cleaning agents for ocular prostheses on human conjunctival cells. MATERIAL AND METHODS: Six groups of specimens were created (saline, soap, 4% chlorhexidine, hydrogen peroxide, 1% triclosan, and citronella oil). Three specimens were made for each disinfectant at each disinfection period (1, 7, 15, 30, 60, and 90 days), totaling 108 specimens. Thus, the specimens were disinfected, with different disinfectants, for different periods of time. After each disinfection process, the specimens were washed with sterile distilled water. A human conjunctival cell line was grown on the acrylic resin specimens and then cytotoxicity tests (MTT and Neutral Red (NR)) were performed. A negative control (untreated cell cultures) and positive control (Tween 20) were created. Two-way analysis of variance (ANOVA) and Bonferroni test were performed (p < 0.05). RESULTS: For the MTT and NR tests, when there was a significant difference between the disinfectant and negative control, the disinfectant generated a significant reduction in cell proliferation most of the time. CONCLUSIONS: All reductions in cell proliferation caused by the disinfectants were clinically acceptable. All disinfectants tested in this study were found to be non-cytotoxic to human conjunctival cells.

Influence of thermal cycles and disinfection on the roughness, microhardness and color of PETG/TPU and PMMA.

BACKGROUND: Occlusal splints can protect teeth during bruxism, preventing tooth wear, as well as during sports activities, shielding them from impacts. OBJECTIVES: To verify the influence of thermal cycles and disinfection on the roughness, microhardness and color of polyethylene terephthalate glycol/thermoplastic polyurethane (PETG/TPU) and poly(methyl methacrylate) (PMMA). MATERIAL AND METHODS: Thirty-six PETG/TPU samples and 36 PMMA samples were prepared (ø10 mm × 3 mm). Six groups were created according to the material and the disinfection method used (n = 12 each): PETG/TPU (glister), PETG/TPU (hypochlorite), PETG/TPU (soap), PMMA (glister), PMMA (hypochlorite), and PMMA (soap). Roughness, Knoop microhardness and color evaluations were performed before the experiments (T1), after thermocycling (T2) and after disinfection (T3). Three-way repeated measures analysis of variance (ANOVA) and Tukey's test were used for statistical evaluations. RESULTS: For roughness and color, ANOVA showed statistical significance based on the interaction between thermal cycling, material and disinfectant factors. In terms of Knoop microhardness, ANOVA showed statistical significance based on the interaction between thermal cycling and material factors. CONCLUSIONS: Roughness results were clinically acceptable in all groups at all time points, except the PETG/TPU and PMMA groups disinfected with hypochlorite. Microhardness significantly increased for both materials after thermal cycling, and at all time points, the microhardness of PMMA was significantly higher than that of PETG/TPU. After thermal cycling, the color changes were clinically unacceptable in all groups.

Influence of Different Restoring Materials on Stress Distribution in Prosthesis on Implants: A Review of Finite Element Studies.

The selection of material used on the occlusal surface of implant-supported prostheses is important, as these materials can transmit destructive forces to the interface between the alveolar bone and the implant. Different prosthetic materials are suggested for implant-supported prostheses. The choice of prosthetic material is a controversial issue, and there is a consensus that implant survival is not affected by the prosthetic material. Three-dimensional finite element studies are often used in dentistry to estimate the stress distribution that occurs in the implant system, peri-implant bone, and prosthetic components. To analyze the influence of the prosthetic restorative material on the stresses in bone tissue and peri-implant through a literature review of three-dimensional finite element studies. The search for articles was performed in the PubMed/Medline database up to November 2021. The selected articles were independently evaluated by two different reviewers. The information collected was author and year of publication, dimensions of implants used, the material used in the prosthetic crown, simulated force and direction, and conclusion and effect. After searching, 14 studies were selected for full reading, and based on the inclusion and exclusion criteria, all could be included in this review. The articles were based on evidence-based laboratory medicine. After analyzing these articles, it was concluded that the prosthetic materials used on the occlusal surface do not interfere with the destruction of stresses to the bone and peri-implant tissue, both in single prostheses and protocol-type prostheses, when three-dimensional finite element method is used.

Halitosis and Pain Threshold of Peri-Implant Tissues: An Observational Cohort Study

Abstract In this study, we aimed to evaluate the halitosis and pain threshold of the peri-implant soft tissues in individuals rehabilitated with implant-supported prostheses. Forty-eight subjects were divided into four groups (n = 12) according to their prosthetic rehabilitation: single-tooth fixed prosthesis, multi-tooth fixed prosthesis, overdentures, and the Brånemark protocol. Halitosis was measured using a halimeter, whereas the pain threshold was measured using Von Frey monofilaments. Measurements were taken before (t0) and 30 days after (t1) placement of healing caps, and at the time of (t2) and 30 days after (t3) prosthetic placement. Halitosis data were analyzed using the chi-square test and Bonferroni correction (p < 0.05). Two-way ANOVA and Tukey's test (p < 0.05) were used to analyze pain threshold data. We noted an association between halitosis and time for the Brånemark protocol [X2(6) = 18.471; p = 0.005] and overdenture groups [X2(6) = 17.732; p = 0.007], and between halitosis and type of prosthesis only at t0 [X2(6) = 12.894; p = 0.045]. The interaction between time and the type of prosthesis significantly interfered with the mean pain threshold values (p = 0.001). At most time points, the majority of participants in each group had clinically unacceptable halitosis. After 30 days of using the prostheses, the overdenture group had a lower pain threshold compared to the Brånemark protocol group.

Resumo Este estudo teve como objetivo avaliar a halitose e o limiar de dor dos tecidos moles peri-implantares em indivíduos reabilitados com próteses implantossuportadas. Um total de 48 indivíduos foram divididos em quatro grupos (n=12), de acordo com as reabilitações: prótese fixa unitária, prótese fixa multidentária, sobredentadura e protocolo de Brånemark. A halitose foi medida com um halímetro, enquanto o limiar de dor foi medido com monofilamentos de von Frey. As medições foram feitas antes (t0) e 30 dias após (t1) a colocação das tampas de cicatrização e no momento (t2) e 30 dias após (t3) a colocação da prótese. Os dados de halitose foram analisados por meio do teste qui-quadrado e correção de Bonferroni (p < 0,05). ANOVA de duas vias e o teste de Tukey (p < 0,05) foram usados para analisar os dados do limiar de dor. Observou-se associação entre halitose e tempo para o protocolo de Brånemark [X2(6) = 18,471; p = 0,005] e grupos overdenture [X2(6) = 17,732; p = 0,007], e entre halitose e tipo de prótese apenas em t0 [X2(6) = 12,894; p = 0,045]. A interação entre o tempo e o tipo de prótese interferiu significativamente nos valores médios do limiar de dor (p = 0,001). Na maioria dos pontos de tempos, a maioria dos participantes de cada grupo apresentava halitose clinicamente inaceitável. Após 30 dias de uso das próteses, o grupo overdenture apresentou menor limiar de dor em comparação ao grupo do protocolo de Brånemark.

Effect of glaze and chlorhexidine on physical and mechanical properties of bis-acryl resin: An in situ study.

BACKGROUND: Temporary prosthesis protects the oral tissues, in addition to providing aesthetic look and masticatory function until a definitive prosthesis is manufactured. OBJECTIVES: To evaluate the effect of glaze and 0.12% chlorhexidine (CHX) on the physical and mechanical properties of bis-acryl, and to evaluate the antimicrobial efficacy of CHX. MATERIAL AND METHODS: Eighty specimens of bis-acryl resin were made. Over 40 of them the glaze was applied. One specimen with and 1 specimen without glaze were placed in niches of an appliance manufactured for each patient. Each of the 20 volunteers received 2 devices. Initially, the volunteers used one device and treated it with sucrose for 7 days (control), and later they used the other device and treated it with sucrose and CHX for 7 days (test). Color, microhardness, roughness, surface energy, and insoluble extracellular polysaccharides (EPS) tests were performed. All results were submitted to the Tukey's test, with the exception of the EPS results, which were submitted to the Student's t test. RESULTS: The ΔE00 of the unglazed control group was significantly higher than that of the unglazed test group. In all groups, a significant decrease in microhardness occurred over time. At both times, the glaze significantly increased the microhardness of the specimens (in all the glazed groups). At the final time, the test glaze group showed significantly higher microhardness compared with the control glaze group. Roughness in the groups without glaze increased significantly with CHX treatment over time. At both times, the glaze generated a significant reduction in roughness in the control and test groups. There was a significant reduction in surface energy over time in all groups. In most comparisons, the glazed groups showed significantly higher surface energy values compared with the unglazed control group. At the final time point, the unglazed test group showed a significantly higher surface energy value than the unglazed control group; and the glazed test group showed a significantly higher surface energy value compared with the glazed control group. The resins that received CHX had a significantly lower amount of biofilm. CONCLUSIONS: Color values were clinically acceptable in all tested groups. At both time points, the roughness values were clinically acceptable only in the glazed groups. Glaze increased the microhardness of the specimens. Microhardness and surface energy were reduced over time in all groups. Chlorhexidine can help prevent microhardness degradation. Glaze and CHX can increase surface energy. Chlorhexidine reduced the amount of bacterial biofilm.

Prótese overdenture: sistema o'ring / Overdenture prosthesis: o'ring system

Overdenture é uma prótese total que se caracteriza por usar apoios retentivos para que aumente sua estabilidade e retenção na cavidade bucal, gerando assim menor desconforto ao paciente e melhor adaptação. A Prótese overdenture dentossuportada necessita de elementos dentais remanescentes com canais tratados endodonticamente e que possuam suporte periodontal adequado. O objetivo deste relato de caso clínico é expor a sequência de confecção de uma prótese overdenture dentossuportada maxilar associada a uma prótese total convencional mandibular, com os passos clínicos detalhados por meio de uma abordagem teórica e visual. Esse tipo de reabilitação favorece a adaptação do paciente à nova condição, visto que o uso de próteses totais convencionais pode causar certo desconforto ao paciente devido à falta de retenção e estabilidade. Essa manutenção dos dentes remanescentes favorece à manutenção óssea e a futura decisão do paciente em optar pela instalação de implantes dentários, podendo confeccionar próteses implantorretidas (overdentures) ou implantossuportadas (protocolo).O Paciente demonstrou-se satisfeito com o resultado estético e funcional após a instalação da prótese concretizando que o tratamento é viável(AU)

Overdenture is a denture that utilizing retentive supports for increase stability and retention in oral cavity. The tooth-supported overdenture require dental elements with root canal therapy and good periodontal support. The aim of this study is to report the confection of a maxillary tooth-supported overdenture associated with mandibular denture and your clinical steps. This rehabilitation promotes the patient's adaptation the new condition, since the use of conventional dentures may cause discomfort due to lack of retention and stability. The preservation of dental elements promotes bone maintenance and forthcoming decision of the patient in the installation of dental implants that can choose implantretained or implant-supported prosthesis. Patient was satisfied with aesthetic and functional result after installation of prosthesis(AU)

Reabilitação de pacientes com comunicação buco nasal: relato de casos / Rehabilitation of patients with oral and nasal communication: case report

A sobrevivência de pacientes com câncer de cabeça e pescoço vêm melhorando, entretanto, algumas deformidades podem ocorrer devido dos tratamentos cirúrgicos que geram mutilações bucomaxilofaciais como perda de dentes, estruturas do palato, língua ou assoalho, resultando em alterações na fonética, mastigação e deglutição. Nesses casos há a necessidade que seja realizado uma reabilitação protética buscando torná-los indivíduos com menos problemas sociais, psicológicos e físicos, visto que mais procedimentos cirúrgicos estão contra indicados para solucionar os efeitos colaterais gerados pelo tratamento das neoplasias. Esse tipo de reabilitação protética com prótese ou placa obturadora possibilita benefícios na fonética, facilita a convivência social e atividades nutricionais como alimentação e deglutição, permitindo ao paciente uma vida com menos constrangimentos. Este trabalho tem como objetivo relatar dois casos clínicos onde os pacientes foram submetidos a reabilitação com placa obturadora palatina feitos após cirurgias oncológicas. Os pacientes de gêneros diferentes e com comunicações buco-nasal similares receberam o mesmo planejamento reabilitador que foram confeccionadas a partir de um molde que foi enviado ao laboratório. Após a instalação foi possível verificar que houve sucesso no tratamento, notando uma melhora imediata comprovando a eficácia do método reabilitador(AU)

This paper relates two clinical cases where patients were recovered with a palatal splint made after oncological surgeries. Survival of patients and necks can occur, however, some deformities can occur during oral and maxillofacial treatment, such as the appearance of teeth, palate structures, mutilations or posterior jaws, leading to changes in aesthetics, surgery and swallowing. If the need to perform a prosthetic rehabilitation is necessary so that the results are seen with less problems, psychological and physical, that more procedures are performed so that the effects of neoplasms are contraindicated by the treatment. This type of prosthetic rehabilitation with prosthesis or obturator plate provides benefits in phonetics, facilitates social coexistence and nutritional activities such as eating and swallowing, allowing the patient a life with less constraints. Patients of different genders and with similar oral and nasal communications received the same rehabilitation plan that were made from a mold that was sent to the laboratory. After installation, it was possible to verify that the treatment was successful, noting an immediate improvement, proving the effectiveness of the rehabilitation method(AU)

Novos materiais livres de metal para confecção de próteses monolíticas em sistema CAD/CAM / New metal-free materials for making monolithic prostheses in CAD/CAM system

A busca por naturalidade dos procedimentos restauradores em reabilitação oral tem contribuído para o desenvolvimento de vários tipos de materiais livres de metal ("metal free"). A confecção de próteses com estes sistemas totalmente puros, mostra-se como excelente alternativa restauradora, com potencial estético superior às próteses metalocerâmicas. É indiscutível que a tecnologia CAD/CAM (Computer-aided design/ Computer-aided manufacturing) vem se tornando realidade nos consultórios e laboratórios de Prótese Dentária de todo o mundo. Esta tecnologia possibilita o uso de cerâmicas e polímeros na fabricação de próteses, com qualidade e resistência mecânica satisfatórias, padronizando os processos, reduzindo custos e tempo clínico-laboratorial. A grande diversidade destes novos materiais restauradores livres de metal, com suas distintas propriedades estéticas e mecânicas, faz com que seja necessária uma seleção racional desses materiais, a fim de se alcançar a longevidade desejada do tratamento protético reabilitador. Dentre estes materiais, destacam-se as cerâmicas vítreas, as zircônias monolíticas, as cerâmicas infiltradas por polímeros e as resinas nanocerâmicas. O objetivo do trabalho foi avaliar os dados mais relevantes e atuais sobre as propriedades destes novos materiais, os sistemas disponíveis, suas indicações, limitações e seu uso associado com a tecnologia CAD/CAM. Esta revisão consistiu em uma pesquisa eletrônica da literatura publicada nos últimos 15 anos, nas bases de dados: Medline/Pubmed, Embase, Scielo, Bireme, Lilacs e BBO, utilizando-se os seguintes descritores do MESH: [CADCAM AND restorative materials AND monolitic] OR [Monolitic CAD-CAM restorative materials]. Concluiu-se que os materiais monolíticos obtidos pelo sistema CAD/CAM foram desenvolvidos para oferecer uma melhor adaptação e durabilidade das peças, com ótimas taxas de sobrevida e redução de tempo clínico e laboratorial, oferecendo ao paciente conforto, sessões clínicas mais curtas e restaurações de qualidade superior aos sistemas convencionais. Todos os materiais citados nesta revisão apresentaram vantagens e desvantagens, cabendo ao profissional selecionar o melhor material para cada situação clínica em específico, levando em conta os prós e contras de cada um(AU)

The naturalness of restorative procedures in oral rehabilitation has contributed to the development of various types of metal-free materials ("metal free"). The manufacture of prostheses with these totally pure systems is shown to be an excellent restorative alternative, with an aesthetic potential superior to metal-ceramic prostheses. It is indisputable that CAD/ CAM (Computer-aided design/Computer-aided manufacturing) technology is becoming a reality in dental practices and laboratories around the world. This possibility of manufacturing ceramic materials and polymers in strength manufacturing, with strength technology, manufacturing processes, standardizing quality clinical time, higher cost and clinical time. These new aesthetic properties of metal, these dif ferences with aesthetic and mechanical characteristics, these differences are necessary for a rational selection of materials with a choice of rehabilitative prosthetic treatment. Among these materials, they stand out as glass ceramics, as monolithic zirconia, as polymer-infiltrated ceramics and as nanoceramic resins. The purpose of working with your materials, and their associated use with CAD/CAM technology. This review consists of an electronic search of the literature published in the last 15 years, in the following databases: Medline/ Pubmed, Embase, Scielo, Bireme, Lilacs and BBO, using the following MESH descriptors: [CAD-CAM AND restorative materials AND monolithic] OR [CADCAM monolithic restorative materials]. It is concluded that the CAD/CAM materials were designed with comfort for a better adaptation and durability of the parts, with excellent survival rates and reduction of clinical and laboratory time, offering the patient, shorter clinical sessions and superior quality restorations to the systems conventional. All those mentioned in this review present advantages and advantages of each material, and it is up to the professional to select the best one for each specific clinic, in each situation of materials and against indications of materials(AU)

Extended-pour and conventional alginates: effect of storage time on dimensional accuracy and maintenance of details.

OBJECTIVE: This study aimed to evaluate the dimensional stability and maintenance of details of conventional and high stability alginates up to 5-day storage. METHODS: Two types of alginates were selected (n=10) for this study, conventional (Hydrogum) and high stability alginates (Hydrogum 5), which were produced with the aid of a cylindrical metal block and a ring-shaped metal mold (Specifications 18, 19, and 25, ANSI/ADA). Ten images were obtained from the molds for the dimensional stability test, which were taken immediately after their production and at each different storage periods (15 min, 24 h, 48 h, 72 h, 96 h, and 120 h) by a digital camera. The specimens were kept hermetically sealed in plastic bags (23°C) and then used to obtain 140 (n=70) dental stone models, used in the detail reproduction test, in which the angular accuracy of three grooves (20 µm, 50 µm, and 75 µm) was observed at each period. The details reproduction accuracy was classified using a predetermined score classification. Measurements of dimensional changes were made in the Corel DRAW X6 program. The data were submitted to the Student's t-test (α?#8197;= 0.05). RESULTS: A statistically significant difference concerning the size of the matrix was observed after 24h for both alginates, and a statistically significant negative linear dimensional change (contraction) was verified after 24 h of storage (1.52% for the high stability alginate, and 1.32% for the conventional alginate). The high stability alginate kept the full details for 72 hours, while the conventional alginate, for 24 h. Both alginates reproduced the 75 µm groove at all storage periods. CONCLUSION: Impressions made with both alginates presented satisfactory clinical results when the alginates were immediately poured.

Extended-pour and conventional alginates: effect of storage time on dimensional accuracy and maintenance of details

ABSTRACT Objective: This study aimed to evaluate the dimensional stability and maintenance of details of conventional and high stability alginates up to 5-day storage. Methods: Two types of alginates were selected (n=10) for this study, conventional (Hydrogum) and high stability alginates (Hydrogum 5), which were produced with the aid of a cylindrical metal block and a ring-shaped metal mold (Specifications 18, 19, and 25, ANSI/ADA). Ten images were obtained from the molds for the dimensional stability test, which were taken immediately after their production and at each different storage periods (15 min, 24 h, 48 h, 72 h, 96 h, and 120 h) by a digital camera. The specimens were kept hermetically sealed in plastic bags (23°C) and then used to obtain 140 (n=70) dental stone models, used in the detail reproduction test, in which the angular accuracy of three grooves (20 µm, 50 µm, and 75 µm) was observed at each period. The details reproduction accuracy was classified using a predetermined score classification. Measurements of dimensional changes were made in the Corel DRAW X6 program. The data were submitted to the Student's t-test (α?#8197;= 0.05). Results: A statistically significant difference concerning the size of the matrix was observed after 24h for both alginates, and a statistically significant negative linear dimensional change (contraction) was verified after 24 h of storage (1.52% for the high stability alginate, and 1.32% for the conventional alginate). The high stability alginate kept the full details for 72 hours, while the conventional alginate, for 24 h. Both alginates reproduced the 75 µm groove at all storage periods. Conclusion: Impressions made with both alginates presented satisfactory clinical results when the alginates were immediately poured.

RESUMO Objetivo: O presente estudo teve como objetivo avaliar a estabilidade dimensional e manutenção de detalhes de alginatos convencionais e de alta estabilidade por até 5 dias de armazenamento. Métodos: Para esse estudo, foram selecionados dois tipos de alginatos: convencional (Hydrogum) (n = 10) e de alta estabilidade (Hydrogum 5) (n = 10), sendo produzidos com o auxílio de um bloco metálico cilíndrico e um molde metálico em forma de anel (especificações 18, 19 e 25, ANSI/ADA). Para o teste de estabilidade dimensional, dez imagens foram obtidas imediatamente e para cada tempo de armazenamento (15 min, 24, 48, 72, 96 e 120 horas), realizadas por câmera digital. As amostras foram mantidas hermeticamente fechadas em sacos plásticos (23°C). Para o teste de reprodução de detalhes, as amostras foram utilizadas para obter 140 (n = 70 por grupo) modelos de gesso, sendo observada a precisão angular de três sulcos (20 µm, 50 µm e 75 µm) para cada período. A precisão da reprodução de detalhes foi classificada usando uma classificação de pontuação predeterminada. As medições das mudanças dimensionais foram feitas no programa Corel DRAW X6. Os dados foram submetidos ao teste t de Student (α = 0,05). Resultados: Foi observada diferença estatística em relação à matriz após 24h para ambos os alginatos. Uma mudança dimensional linear negativa estatisticamente significativa (contração) foi verificada após 24 h de armazenamento (1,52% para alginato de alta estabilidade; 1,32% para alginato convencional). O alginato de alta estabilidade manteve os detalhes completos por até 72 horas, enquanto o alginato convencional, por 24 horas. Os alginatos reproduziram o sulco de 75 µm para todos os períodos. Conclusão: As impressões feitas com ambos os alginatos devem ser imediatamente vazadas para se ter resultados clínicos satisfatórios.

Instalação e controle de próteses totais convencionais / Installation and control of conventional total prostheses

Na reabilitação de pacientes edêntulos com próteses totais convencionais envolve a expectativa no momento da instalação das próteses, tornando-se indispensáveis o acompanhamento e orientações de uso. Este trabalho tem como objetivo descrever os principais fatores envolvidos na etapa de instalação de novas próteses totais. Vários temas importantes para a odontologia foram abordados, como ajustes das próteses, adaptação do paciente, orientações, manejo, tempo de uso, mudanças na alimentação, dicção, higiene, cuidados necessários e o acompanhamento do paciente após a instalação de novas próteses totais(AU)

In the rehabilitation of edentulous patients with conventional total dentures, it is expected that the prostheses will be installed, making it necessary to follow up and use guidelines. This study aims to describe the main factors involved in the installation of new total dentures. Several important themes for dentistry were addressed, such as adjustments of the prosthesis, patient adaptation, guidelines, management, time of use, changes in feeding, diction, hygiene, necessary care and patient follow-up after the installation of new dentures(AU)

O desafio do restabelecimento de um sorriso antiestético por meio de prótese fixa metal-free / The challenge of restoring an unsightly smile by means of a fixed metal-free prosthesis / El desafío del restablecimiento de una sonrisa antiestética por medio de prótesis fija metal-free

Para alcançar a estética em dentes anteriores deve-se ter conhecimento de diversas técnicas e principalmente fazer a escolha correta dos materiais. As cerâmicas odontológicas estão cada vez mais presentes nas restaurações, visto que possuem ótimas propriedades ópticas e mecânicas. Assim, o objetivo deste estudo foi proporcionar a estética em dentes anteriores com diferentes subtratos através de uma prótese fixa metal-free. Paciente do gênero masculino, 38 anos, procurou atendimento queixando-se da estética do seu sorriso. No exame clínico foi observada uma coroa total metalocerâmica no elemento 21 e facetas de resina composta nos elementos 11,12 e 22, todas com estética insatisfatória. O dente 21 apresentava um núcleo metálico fundido adequado e os dentes 12 e 22 com tratamentos endodônticos. Foi proposta a instalação de pinos de fibra de vidro nos dentes 12 e 22. Além, da confecção de coroas totais metais-free em dissilicato de lítio nos quatro incisivos superiores com o sistema e-max ceram. O resultado final estético e funcional foi aprovado pelo paciente e pelos profissionais envolvidos(AU)

To achieve aesthetics in anterior teeth one must be aware of several techniques and especially make the correct choice of materials. Dental ceramics are increasingly present in restorations, since they have excellent optical and mechanical properties. Thus, the objective of this study was to achieve esthetics in anterior teeth with different substrate through a fixed prosthesis metal-free. A male patient, 38 years old, sought care complaining about the aesthetics of his smile. In the clinical examination a total metaloceramic crown was observed in element 21 and composite resin facets in elements 11,12 and 22, all with unsatisfactory aesthetics. Tooth 21 had a suitable molten metal core and teeth 12 and 22 with endodontic treatments. It was proposed to install fiberglass pins on the teeth 12 and 22. In addition, from the manufacture of total metal-free crowns in lithium disilicate in the four upper incisors with the e-max system ceram. The final aesthetic and functional result was approved by the patient and the professionals involved(AU)

Para alcanzar la estética en dientes anteriores se debe tener conocimiento de diversas técnicas y principalmente hacer la elección correcta de los materiales. Las cerámicas dentales están cada vez más presentes en las restauraciones, ya que poseen óptimas propiedades ópticas y mecánicas. Así, el objetivo de este estudio fue proporcionar la estética en dientes anteriores con diferentes sustratos a través de una prótesis fija metal-free. Paciente del género masculino, 38 años, buscó atención quejándose de la estética de su sonrisa. En el examen clínico se observó una corona total metalocerámica en el elemento 21 y facetas de resina compuesta en los elementos 11,12 y 22, todas con estética insatisfactoria. El diente 21 presentaba un núcleo metálico fundido adecuado y los dientes 12 y 22 con tratamientos endodónticos. Se propuso la instalación de pines de fibra de vidrio en los dientes 12 y 22. Además, de la confección de coronas totales metales libres en disilicato de litio en los cuatro incisivos superiores con el sistema e-max ceram. El resultado final estético y funcional fue aprobado por el paciente y los profesionales involucrados(AU)

Reabilitação oral de paciente submetido à maxilectomia parcial sem comunicação bucossinusal: relato de caso / Oral rehabilitation of patient submitted to partial maxilectomy without bucossinusal communication: case report

Cirurgias de ressecção parcial ou total da maxila em pacientes oncológicos geram comprometimento funcional e estético, alterando a deglutição, mastigação, fonética e aspiração, diminuindo a qualidade de vida do paciente. Assim, o objetivo deste estudo foi descrever a reabilitação oral de um paciente com prótese total maxilar estendida e uma prótese total mandibular convencional. Tal paciente havia sido submetido à uma cirurgia de ressecção parcial do rebordo alveolar maxilar, sem comunicação bucossinusal, por ser portador de Carcinoma espinocelular grau I. Paciente do sexo masculino, 69 anos, procurou atendimento no Centro de Oncologia Bucal da FOA ­ UNESP, para confecção de suas próteses, após dois anos da realização de sua cirurgia. Foi observado declínio do suporte labial no local onde havia sido feita a ressecção cirúrgica gerando comprometimento estético e funcional ao paciente. Desta forma, foi proposta a realização de confecção de prótese total maxilar estendida e prótese inferior convencional, as quais foram instaladas e ajustadas adequadamente. Após 1 ano de acompanhamento, paciente encontra-se satisfeito com o tratamento, o qual devolveu sua estética, função e fonética(AU)

Surgeries of partial or total resection of the maxilla in oncological patients generate functional and aesthetic impairment, altering swallowing, chewing, phonetics and aspiration, reducing the quality of life of the patient. Thus, the objective of this study was to describe the oral rehabilitation of a patient with maxillary total prosthesis and a conventional mandibular total prosthesis. This patient had undergone surgery of partial resection of the maxillary alveolar ridge, without bucosinusal communication, for being a carrier of grade I squamous cell carcinoma. A 69-year-old male patient sought care at the Oral Oncology Center of FOA - UNESP, for denture after two years of surgery. Decreased lip support was observed in the place where surgical resection had been performed, generating aesthetic and functional impairment to the patient. In this way, it was proposed to make a complete maxillary full prosthesis and conventional lower prosthesis, which were installed and adjusted properly. After 1 year of follow-up, the patient was satisfied with the treatment, which returned his aesthetics, function and phonetics(AU)

Satisfação e qualidade de vida em pacientes desdentados após reembasamento com material resiliente / Installation of implant-supported provisional prosthesis: case report

O objetivo desse trabalho foi avaliar a satisfação e a qualidade de vida de pacientes desdentados que tiveram suas próteses totais mandibulares reembasadas com material resiliente (Ufi Gel SC, VOCO, Alemanha). Foram selecionados 20 pacientes desdentados divididos aleatoriamente nos grupos de reembasamento direto ou indireto (n=10). Foram aplicados dois questionários, o OHIP Edent para avaliar a qualidade de vida e um questionário desenvolvido para verificar a satisfação dos pacientes com o uso do reembasador. Os testes clínicos foram realizados em quatro fases durante o tratamento: inicialmente com as próteses totais sem intervenção, 30, 60 e 90 dias após o reembasamento. A análise de variância ANOVA demonstrou que houve uma diferença estatisticamente significante para o fator tempo tanto para a qualidade de vida como para a satisfação (p d" 0,05). Observamos que a qualidade de visa e a satisfação aumentaram após o reembasamento, mas não houve diferença entre os métodos de polimerização testados. O método de polimerização direto é mais simples, menos demorado e menos oneroso para o paciente. Portanto, se não houver diferença entre os métodos de polimerização a longo prazo, não há porque submeter o paciente ao reembasamento indireto(AU)

The aim of this paper was to assess the quality of life and satisfaction for edentulous individuals who had their complete dentures relined with a soft liner material (Ufi Gel SC, VOCO, Germany). A total of 20 patients were selected and divided into two experimental groups, one for a chairside procedure and one for a laboratorial reline (n=10). Two questionnaires were used, the OHIP Edent and a satisfaction form to assess information on the reline material. The tests were performed initially and at 30, 60 and 90 days after the reline. The analysis of variance ANOVA presented a difference for the period evaluation, the quality of life improved after the procedure, but there was no difference between the polymerization methods. The chairside procedure is more simple, faster and more practical for both, professionals and patients. Therefore, if there are no difference in long term results, there is no reason to the patient undergo the laboratorial reline process(AU)

Diagnóstico diferencial de limitação de abertura bucal / Differential diagnosis of limited mouth opening

O objetivo do presente estudo é apresentar uma revisão de literatura exemplificando alguns dos possíveis fatores etiológicos de limitação de abertura bucal e ilustrar o caso de um paciente diagnosticado com hiperplasia do processo coronoide. Foi realizada uma busca nas bases de dados PUBMED/MEDLINE, Scielo, Bireme e Google Acadêmico utilizando-se inicialmente o termo "limited mouth opening" e "limitação de abertura bucal" no mês de novembro de 2016. Além disso, foi realizada busca manual em periódicos e nas bases de dados com novas palavras-chave como disfunção temporomandibular, tétano, traumas, doenças genéticas e imitação de abertura bucal e hiperplasia do processo coronóide. Foram incluídos estudos clínicos, revisões de literatura, revisões sistemáticas e relatos de caso publicados em idioma inglês ou português. Foram descritos os aspectos relevantes sobre desordens na articulação temporomandibular, tétano, traumas e fraturas, lesões orais, neoplasias e efeito colateral de radio e quimioterapia, desordens genéticas, hiperplasia do processo coronóide. O diagnóstico da limitação de abertura bucal é complexo devido ao grande número de fatores que podem provocar o problema. Diante disso, é de suma importância que seja realizada correta anamnese e investigação minuciosa do histórico do paciente, além da realização de exames complementares, permitindo assim, que a causa do problema seja detectada e que o tratamento correto seja aplicado, por meio de abordagem multidisciplinar, melhorando a qualidade de vida e devolvendo saúde ao paciente(AU)

The objective of this study is to present a review of literature exemplifying some of the possible etiological factors of oral opening limitation and to illustrate the case of a patient diagnosed with coronoid hyperplasia. A searched was made on PUBMED / MEDLINE, Scielo, Bireme and Google Scholar databases initially using the term "limited mouth opening" and "limitação de abertura bucal" in the month of November 2016. In addition, a manual search was carried out in journals and with new keywords like temporomanbidular disorders, tetanus, traumas, genetic disorders and limited open mouth and coronoid process hiperplasia. Clinical studies, literature reviews, systematic reviews and case reports published in English or Portuguese were included in the review. Relevant aspects of temporomandibular joint disorders, tetanus, trauma and fractures, oral lesions, neoplasys and side effects of radiotherapy and chemotherapy, genetic disorders, and coronoid process hyperplasia were described. The diagnosis of oral opening limitation is complex because of the many causes of the problem. Therefore, it is very important that a correct anamnesis and detailed investigation of the patient's history be performed, in addition to performing complementary tests, thus allowing the cause of the problem to be detected and treated correctly, through a multidisciplinary approach, improving the quality of life and healing the patient(AU)

Instalação de prótese provisória implantossuportada: relato de caso / Installation of implant-supported provisional prosthesis: case report

A busca por restaurações protéticas suportadas por implantes está aumentando cada vez mais na odontologia, e é uma parte importante do tratamento reabilitador, principalmente em regiões estéticas. Desta forma, o objetivo deste estudo foi descrever o caso clínico de um paciente reabilitado com implante e posterior instalação de prótese provisória em região anterior de maxila, reestabelecendo sua estética, fonética e função. Paciente do sexo masculino procurou atendimento devido à fratura do elemento 2.2. Ao exame clínico, foi observada raiz residual desse elemento. Então, foi proposto ao paciente a exodontia da raiz residual, instalação de implante imediato e posterior instalação de prótese provisória. Após seis meses de acompanhamento, o paciente encontra-se satisfeito com a aparência clínica dos tecidos periodontais adjacentes, sendo então iniciado o tratamento reabilitador protético com a prótese definitiva(AU)

The search for implant-supported prosthetic restorations is increasing in dentistry, and is an important topic of the rehabilitation treatment, especially in esthetic regions. Thus, the aim of this study was to describe a clinical case of a patient rehabilitated with implant and later with provisional prosthesis in the maxilla anterior region, reestablishing esthetics, phonetics and function. A male patient sought the Department of Dental Materials and Prosthodontics of the Faculty of Dentistry of Aracatuba/UNESP due to a fracture of the left lateral incisor. During the clinical exam, a residual tooth root was observed. Then, the extraction of the residual root was proposed, followed by the installation of an immediate implant and subsequent installation of provisional prosthesis. After six months of follow-up, the patient was satisfied with the clinical appearance of the adjacent periodontal tissues and started the prosthetic treatment with the definitive prosthesis(AU)

Fratura de côndilo mandibular não tratada e disfunção temporomandibular: relato de caso / Untreated mandibular condyle fracture and temporomandibular dysfunction: a case report

A fratura de côndilo mandibular é um dos tipos de traumas faciais mais comuns, podendo ser diagnosticado por diversos meios, sendo que uma variedade de planos de tratamentos podem ser instaurados. Este tipo de fratura configura também uma das etiologias da disfunção temporomandibular (DTM), portanto, é indispensável que o profissional realize exames minuciosos, inclusive por meio de exames complementares de imagem para o correto diagnóstico e conduta curativa, tanto da fratura, quanto da disfunção. Sendo assim, o objetivo deste estudo foi descrever um caso de fratura de côndilo mandibular não tratada seguida de DTM. Paciente de 36 anos do gênero masculino com histórico de acidente automobilístico há cinco anos, resultando em fratura de côndilo, com diagnóstico tardio e consolidação em posição inadequada buscou tratamento na Faculdade de Odontologia de Araçatuba - UNESP. A conduta por meio do uso de placa interoclusal levou à eliminação da sintomatologia dolorosa(AU)

The condylar fracture is one of the most common types of facial trauma and can be diagnosed by different methods, and a variety of treatment plans can be used. This type of fracture also constitutes one of the etiologies of temporomandibular disorders (TMD). Therefore, it is essential that the professional conduct thorough examinations, including complementary imaging tests for the correct diagnosis and treatment of the fracture and the dysfunction. Thus, the aim of this study was to describe a case of untreated condylar fracture followed by the development of TMD. A 36-year-old male patient with a history of automobile accident five years ago, resulting in condylar fracture, sought treatment at the Aracatuba Dental School - UNESP. The fracture had late diagnosis and consolidation in a wrong position. The conduct treatment through the use of occlusal splint led to the elimination of the painful symptomatology(AU)

Surface characterization of polymers used in fabrication of interim prostheses after treatment with photopolymerized glaze.

The material used for interim prostheses fabrication must present excellent physical properties for greater longevity in the face of environmental conditions, which can occur in the oral cavity. The purpose of this study was to evaluate the effect of a photopolymerized glaze on the physical and mechanical properties of polymers used for the fabrication of interim prostheses, before and after thermocycling and immersion in staining solutions. One hundred samples of composite and acrylic resins were fabricated: Dencor chemically activated acrylic resin (CAAR) (n=20) and heat-polymerized acrylic resin (HPAR) (n=20), Charisma (n=20), Structur (n=20), and Protemp (n=20). A mechanical polishing was performed on half of the samples, and a chemical polishing was performed on the remaining samples. Subsequently, all samples were submitted to thermocycling and immersion in coffee staining solution for 21days. Analysis of color and microhardness, as well as atomic force microscopy (AFM), scanning electron microscopy (SEM), and energy dispersive x-ray spectrometry (EDS) were performed. The data were submitted to repeated-measures analysis of variance (ANOVA), followed by the Tukey test (α=0.05) and the Student t-test (α=0.05). It was verified that the glaze decreased the chromatic alteration values, and increased the microhardness values of the samples, with the exception of the Charisma resin. The samples that did not receive chemical polishing had the greatest number of surface irregularities. This study concluded that the groups with glaze presented less color alteration. In addition, Charisma and Structur resins exhibited the greatest chromatic stability. As to the microhardness, the values were greater when the samples were treated with the glaze, with the exception of the Charisma group.

Effect of nanoscale particles incorporation on microhardness of polymers for oral prosthesis.

OBJECTIVES: This study aimed to evaluate the influence of the incorporation of pigments on surface hardness of four acrylic resins subjected to thermocycling and analyze their elemental composition using energy dispersive X-ray spectroscopy (EDS). MATERIALS AND METHODS: Twenty-one discs of each resin were fabricated, whereas seven had no additive, seven had 3% of nanoscale pigments and last seven had 10% of them. The percentage was obtained by measuring the total weight of each resin disc. Besides, seven discs composed by only nanoscale pigments were also fabricated, totalizing 91 discs. The pigment was weighed by using an analytical balance (BEL Analytical Equipment, SP, Brazil). The surface hardness was measured through a hardness tester machine before and after thermocycling (5-55°C, for 2000 cycles). Data were analyzed by ANOVA and Tukey's test (P < 0.05). The chemical composition of the discs composed only by nanoscale pigments was analyzed with EDS test. RESULTS: Hardness of all resins decreased after thermocycling. The lowest values were observed on the discs with 3% of nanoscale pigments and discs fabricated only with them. EDS showed the presence of titanium dioxide. CONCLUSION: Discs with 7% of pigments (after thermocycling) showed higher hardness values.